Packaging machine - Single-wave extruder SF-280S

- Use a closed suction structure with a high pressure blower. Steam source and electrical control are concentrated in one operating cabinet. The machine is not less than 1.5 meters.

- Machine base and machine wall are cast steel, wall thickness: 130mm. Structure of the drive shaft.

- Corrugated block material uses 48CrMo alloy steel, surface polishing main wave lot diameter Ф280mm, HRC surface hardness is over 60 degrees.

- Press block Ф284mm, surface grinding and chrome plating, control the piston move up and down, the material is 45 medium carbon steel, quality treatment.

- Grade of pneumatic controlled adhesive wiper, the glue lot diameter Ф215 mm surface after polishing 25 mesh grooves after hard chroming, adhesive roller surface after polishing machining hard chromium plating.

- The corrugated block material, the press block is made from special steel, the wave block is 0.15mm high in the middle, the press block is 0.075mm high. A position extension is installed. Reciprocating piston uses Ф160 mm piston.

 

- The slime drying batch uses Ф300 mm steel, all using metal flexible pipes.

1.Working width: 1800mm

2. Manipulation direction: Left or right (Based on customer's factory to determine)

3. Design speed: 100m / min

4. Using temperature range: 200 - 260oC

5. Wave pattern (UV type or UVV type)

1. Diameter of the wave plot: Ф280 mm

2. Diameter of the press lot: Ф284 mm;

3. Diameter of the glue lot: Ф216 mm;

4. The diameter of the drying batch: Ф320 mm

1. Main drive motor: 7.5KW

    Rated voltage: 380V 50Hz Continuous working mode (S1)

2. Motor inlet: 7.5KW

Rated voltage: 380V 50Hz Continuous working mode (S1)

The wave-making machine is an important machine in the whole equipment of corrugated carton production, partly decides the quality of the finished corrugated carton. The customer needs to choose a machine that matches the customer's performance and select a professional packaging machine supplier.